Skip to content
Speak with our advisory team

18 Nov 2026 · TAMA Insight

Semiconductor and Electronic Component Manufacturing in Indonesia: KBLI 26199 Licensing, Industrial Compliance and Investment Considerations

Indonesia’s electronics manufacturing industry presents opportunities for businesses involved in semiconductor fabrication, integrated circuits, printed circuit boards and other electronic components. As manufacturers seek to diversify production and…

Semiconductor and Electronic Component Manufacturing in Indonesia KBLI 26199 Licensing, Industrial Compliance and Investment Considerations

Indonesia’s electronics manufacturing industry presents opportunities for businesses involved in semiconductor fabrication, integrated circuits, printed circuit boards and other electronic components. As manufacturers seek to diversify production and establish new facilities in Southeast Asia, Indonesia’s regulatory framework has become increasingly relevant to investment decisions involving semiconductor manufacturing, electronic assembly and advanced industrial technologies.

However, the licensing requirements for an electronics manufacturing facility cannot be determined solely by identifying its finished products. A company fabricating semiconductor wafers may operate substantially different production processes from a manufacturer assembling printed circuit boards or producing electronic control modules, even where both businesses fall within the same industrial classification.

Under the Indonesian Standard Industrial Classification 2025 (Klasifikasi Baku Lapangan Usaha Indonesia or KBLI 2025), KBLI 26199 – Manufacture of Other Electronic Components and Boards Not Elsewhere Classified (Industri Komponen dan Papan Elektronik Lainnya YTDL) covers the manufacture of semiconductors, integrated circuits, printed circuits, microprocessors, microcontrollers, resistors, capacitors, inductors, electronic switches, transducers, display components, LEDs, semiconductor wafers, chips and programmable logic controllers.

The classification is established under Statistics Indonesia Regulation No. 7 of 2025 concerning the Indonesian Standard Industrial Classification (BPS Regulation 7/2025). Its principal business licensing framework is governed by Government Regulation No. 28 of 2025 concerning the Implementation of Risk-Based Business Licensing (Government Regulation 28/2025) and Minister of Industry Regulation No. 37 of 2025 concerning Business Activity and Product/Service Standards under Risk-Based Business Licensing in the Industrial Sector (Ministerial Regulation 37/2025).

For investors and manufacturers, the essential consideration is that KBLI 26199 provides the classification for specified electronic manufacturing activities but does not automatically cover every upstream process, finished electronic product or commercial operation within an integrated electronics business.

1. What Manufacturing Activities Are Covered by KBLI 26199?

KBLI 26199 encompasses a broad range of manufacturing activities involving electronic components and assemblies. Its scope expressly includes semiconductors, integrated circuits, microprocessors, microcontrollers, diodes, LEDs, resistors, capacitors, inductors, electronic crystals and other components used in electronic products.

The classification also covers printed circuits, semiconductor chips, wafers and dies, together with interface cards and programmable logic controllers. These products may be supplied as individual components or incorporated into more complex electronic assemblies used in computers, telecommunications equipment, industrial control systems and other applications.

An important distinction concerns the manufacturing process undertaken by the company. Semiconductor manufacturing may involve wafer processing, fabrication and other technologically complex production stages, while printed circuit manufacturing and electronic component assembly may rely on different equipment, materials and production methods.

Although these activities may fall within KBLI 26199, the applicable environmental, technical and operational requirements must be assessed according to the production processes actually performed.

The classification also differs from the manufacture of complete electronic equipment. A company manufacturing electronic components for computers is not necessarily carrying out the same industrial activity as a manufacturer producing complete computers or telecommunications devices.

Where a company undertakes both component manufacturing and the production of finished electronic products, additional classifications may need to be considered based on the actual manufacturing operations.

This distinction is particularly relevant to vertically integrated manufacturers that produce components internally before incorporating them into finished products sold under their own brands.

2. Industrial Business Licensing under OSS

KBLI 26199 is classified as a medium-high-risk business activity under the applicable OSS framework. The principal business licensing instruments therefore include a Business Identification Number (Nomor Induk Berusaha or NIB) and a verified Standard Certificate (Sertifikat Standar).

Government Regulation 28/2025 establishes the general risk-based licensing framework, while Ministerial Regulation 37/2025 provides the applicable industrial business standards and verification requirements.

For electronic component manufacturers, the licensing process requires the company to demonstrate that its proposed production arrangements satisfy the relevant industrial standards.

The requirements include information concerning the intended raw materials, production equipment, manufacturing process, quality-control arrangements and other operational matters relevant to the facility.

The industrial standards also contemplate documentation establishing the manufacturer’s control over its production machinery and testing equipment, together with information concerning the planned manufacturing capacity.

For investors establishing semiconductor or electronic component production facilities, these requirements are important because the proposed industrial activity must be supported by an identifiable production process and appropriate technical resources.

The company must also comply with the applicable industrial reporting and administrative requirements, including obligations administered through the National Industrial Information System (Sistem Informasi Industri Nasional or SIINas).

The issuance of an NIB should therefore not be treated as completion of the licensing process where verification of the Standard Certificate remains outstanding.

Similarly, the company’s industrial business licensing does not replace the environmental, building or other approvals applicable to the particular production facility.

3. Semiconductor Fabrication and Electronic Assembly: Different Compliance Profiles

One of the most significant regulatory considerations under KBLI 26199 is the distinction between semiconductor fabrication and other electronic component manufacturing activities.

A semiconductor fabrication facility may involve highly controlled production environments, specialised equipment, substantial water and energy requirements, and chemical processes used in manufacturing semiconductor devices.

Depending on the technology and production stage, these processes may involve chemical treatment, cleaning, deposition, etching and other activities requiring particular environmental and industrial safety controls.

A company manufacturing printed circuit boards or assembling electronic components may have a different operational profile, even where certain chemical or technical processes are also involved.

This distinction matters because the applicable environmental and industrial requirements must correspond to the actual materials, equipment and manufacturing processes.

A business establishing a semiconductor wafer fabrication facility should not assume that the licensing and environmental requirements applicable to a comparatively simple electronic assembly facility will be sufficient for its operations.

Likewise, an electronics assembler should not automatically be treated as operating a semiconductor fabrication plant solely because its products incorporate integrated circuits or other semiconductor components.

The relevant assessment should therefore identify the stages of production undertaken at the facility, the substances and materials used, and the environmental and technical consequences of those processes.

For investors, this analysis should be completed before selecting the industrial location and finalising the factory design.

4. Environmental Approval and the 2026 Industrial Estate Requirements

Manufacturers operating under KBLI 26199 must comply with the environmental requirements applicable to their facilities and production processes.

Government Regulation No. 22 of 2021 concerning the Implementation of Environmental Protection and Management establishes the principal framework governing environmental approval, pollution control and waste management.

Depending on the nature, scale and location of the manufacturing activity, the company may be required to prepare an Environmental Impact Assessment (Analisis Mengenai Dampak Lingkungan Hidup or AMDAL), Environmental Management and Monitoring Measures (UKL-UPL) or another applicable environmental instrument.

For semiconductor manufacturing, particular attention may be required where production involves chemical substances, wastewater, air emissions or waste materials subject to environmental controls.

Where hazardous and toxic substances (Bahan Berbahaya dan Beracun or B3) or hazardous waste are involved, the applicable handling, storage and waste management requirements must also be considered.

However, not every facility manufacturing electronic components under KBLI 26199 is automatically subject to the same hazardous material or hazardous waste obligations. The applicable requirements depend on the materials used and the waste actually generated.

A relevant regulatory development is Minister of Industry Regulation No. 2 of 2026 concerning Procedures for the Preparation and Approval of Detailed Environmental Management and Monitoring Plans for Businesses Located in Industrial Estates.

The regulation, effective from 4 March 2026, replaces Minister of Industry Regulation No. 1 of 2020 and updates the procedures governing detailed environmental management and monitoring plans (RKL-RPL Rinci) for qualifying activities located in industrial estates.

This is particularly relevant to manufacturers considering the establishment of electronics or semiconductor production facilities within designated industrial estates.

Nevertheless, the location of a factory within an industrial estate does not automatically eliminate its environmental obligations. The manufacturer must determine the applicable environmental approval arrangements and satisfy the requirements relevant to its own activities.

Environmental compliance should therefore be incorporated into the initial feasibility assessment, particularly where the proposed production process requires significant water resources, chemical management facilities or specialised wastewater treatment.

5. Product Standards, Testing and Quality Control

Electronic component manufacturers must consider the technical requirements applicable to the products they intend to manufacture and market.

The relevant standards may concern electrical characteristics, product reliability, component performance, material specifications and other technical parameters determined by the product’s intended use.

Indonesia’s Indonesian National Standards (Standar Nasional Indonesia or SNI) framework may be relevant to particular electronics products. However, the existence of an SNI does not automatically establish that every semiconductor, printed circuit or electronic component manufactured under KBLI 26199 is subject to mandatory SNI certification.

The manufacturer must determine whether a specific standard has been made compulsory for the relevant product under an applicable regulation.

Where the components are supplied for incorporation into finished products, the manufacturer may also be required to satisfy technical specifications imposed by its customers.

For example, an integrated circuit supplier may be required to demonstrate conformity with agreed technical parameters, while a manufacturer supplying electronic components for industrial equipment may face different performance and reliability requirements.

These contractual specifications should be distinguished from mandatory regulatory standards.

Where the manufacturing facility produces several categories of electronic components, the quality-control arrangements should reflect the technical requirements applicable to each product category.

Product testing and traceability may also be commercially important where components are supplied to industries requiring particularly stringent quality assurance.

For manufacturers, the relevant contracts should clearly identify product specifications, testing arrangements, quality acceptance procedures and responsibility for defective components.

6. Foreign Investment in Semiconductor and Electronic Component Manufacturing

Foreign investors intending to establish semiconductor or electronic component manufacturing operations in Indonesia must consider the applicable investment framework alongside industrial licensing.

Presidential Regulation No. 10 of 2021 concerning Investment Business Fields, as amended by Presidential Regulation No. 49 of 2021, establishes the general framework governing foreign investment access.

An Indonesian foreign-invested company (Perseroan Terbatas Penanaman Modal Asing or PT PMA) must also comply with the applicable investment and capital requirements under Minister of Investment and Downstreaming/Head of the Investment Coordinating Board Regulation No. 5 of 2025.

For semiconductor and electronic component manufacturers, the proposed investment structure should reflect the production activities to be undertaken.

A company establishing a semiconductor fabrication facility may require a different investment and operational structure from one undertaking electronic component assembly or manufacturing printed circuit boards.

Where the project involves several production stages, the company should determine whether those activities fall within KBLI 26199 or require additional industrial classifications.

Industrial location is another important consideration.

Government Regulation No. 20 of 2024 concerning Industrial Zoning provides the relevant framework governing industrial location and development.

The proposed factory location must therefore be assessed in light of the applicable industrial, spatial planning and environmental requirements.

For semiconductor projects in particular, the suitability of the industrial site may also depend on access to reliable electricity, water and other infrastructure necessary for the intended production process.

These considerations should be resolved before the company commits to substantial capital investment in industrial facilities and manufacturing equipment.

7. When Additional KBLI Classifications May Be Necessary

Although KBLI 26199 covers a broad range of electronic components and related manufacturing activities, it should not be treated as a comprehensive classification for every business operating within the semiconductor and electronics supply chain.

For example, a company manufacturing semiconductor wafers, integrated circuits, microcontrollers or printed circuits may operate principally under KBLI 26199. However, where the company also manufactures complete computers, telecommunications equipment or other finished electronic devices, the additional manufacturing activities should be assessed under the relevant classifications within KBLI Division 26.

The same consideration applies to businesses manufacturing solar energy components. KBLI 2025 separately identifies the manufacture of solar cells, solar panels and photovoltaic inverters within the relevant classifications under KBLI subgroup 2611. A company producing these products should therefore assess whether the specific solar manufacturing classification applies instead of assuming that KBLI 26199 covers all semiconductor-based technologies.

Additional classifications may also become relevant where a manufacturer undertakes separate activities involving the production of industrial machinery, telecommunications equipment or other specialised electronic products.

However, the use of a particular electronic component within a finished product does not automatically mean that the component manufacturer is engaged in manufacturing that finished product.

For example, a business producing integrated circuits supplied to telecommunications manufacturers does not necessarily need to register a telecommunications equipment manufacturing KBLI merely because its customers incorporate those circuits into communications devices.

The distinction must be based on the products actually manufactured and sold by the company.

A similar issue arises where a semiconductor manufacturer undertakes upstream activities involving the independent commercial production of specialised chemicals or other industrial materials. Where these activities constitute separate manufacturing operations, the relevant chemical or materials manufacturing classifications should be considered.

However, the use or internal preparation of materials as part of the company’s existing manufacturing process does not automatically require every supporting production stage to be registered under a separate KBLI.

For businesses undertaking independent wholesale trading, equipment installation or repair services, the corresponding trading or service classifications may also need to be assessed.

The ordinary sale of products manufactured by the company’s own factory should not automatically be treated as requiring a separate wholesale trading classification.

The appropriate approach is to identify independently identifiable business activities and determine whether they fall within the existing manufacturing classification or require additional KBLI registrations.

This distinction is particularly important for integrated electronics manufacturers operating several production lines within one industrial complex.

8. Semiconductor Technology, Intellectual Property and Cross-Border Supply Arrangements

Electronic component manufacturing may involve technical information, production processes and intellectual property owned or licensed by third parties.

For example, a company manufacturing integrated circuits or microcontrollers may rely on proprietary designs, semiconductor manufacturing technology or other technical information supplied by an overseas technology partner.

The relevant commercial arrangements should therefore address intellectual property ownership, technology licensing, confidentiality and responsibility for technical documentation.

Where manufacturing is undertaken under a licence or technology transfer agreement, the contract should establish the permitted use of the relevant technology, applicable quality requirements and restrictions concerning further disclosure or use by third parties.

The manufacturing arrangement should also distinguish ownership of the semiconductor design from ownership of the manufactured products and the rights granted to the Indonesian manufacturer.

For international supply chains, import and export requirements must be considered according to the actual products and materials involved.

The applicable customs classification may affect tariffs, import documentation and other requirements concerning the movement of electronic components, semiconductor materials or manufacturing equipment.

Certain advanced technologies or specialised products may also be subject to particular trade controls, depending on their technical characteristics, intended use and destination.

However, not every integrated circuit, semiconductor wafer or electronic component is automatically subject to special strategic-goods restrictions merely because it is manufactured under KBLI 26199.

The applicable requirements must be determined according to the specific product and relevant regulatory classification.

For investors and manufacturers relying on international technology and supply arrangements, these matters should be addressed as part of the commercial and regulatory structure of the project.

9. Practical Considerations for Establishing an Electronic Component Manufacturing Facility

For companies entering Indonesia’s semiconductor and electronic component manufacturing sector, the appropriate licensing strategy should begin with a clear identification of the products to be manufactured and the processes undertaken at the proposed facility.

The manufacturer should determine whether its intended activities involve semiconductor fabrication, printed circuit manufacturing, electronic component production, module assembly or a combination of these operations.

It must then confirm that the proposed activities are appropriately classified under KBLI 26199 or other relevant industrial classifications, and obtain the applicable OSS authorisations.

For KBLI 26199, the medium-high-risk licensing framework requires particular attention to the verification of the Standard Certificate and compliance with the industrial business standards under Ministerial Regulation 37/2025.

The company should also assess the environmental requirements applicable to its manufacturing process, including chemical management, wastewater treatment, waste handling and the environmental approval framework relevant to its industrial location.

Where the facility will operate within an industrial estate, the procedures established under Ministerial Regulation 2/2026 should be considered where applicable.

The relevant product standards, testing requirements and contractual quality obligations should also be assessed before commercial production begins.

Where the business model includes additional manufacturing, trading or service activities, those operations must be separately reviewed to determine whether additional KBLI registrations or sector-specific authorisations are required.

This approach is particularly important for foreign investors and integrated manufacturers, whose projects may involve several related businesses within the same industrial supply chain.

Conclusion

KBLI 26199 provides the principal industrial classification for the manufacture of semiconductors, integrated circuits, printed circuits, microprocessors, microcontrollers, electronic components, wafers, chips and other specified electronic products in Indonesia.

Under Government Regulation 28/2025, the activity falls within the medium-high-risk business licensing framework, while Ministerial Regulation 37/2025 establishes the relevant industrial business standards and verification requirements.

However, the classification covers manufacturing activities with potentially different technical and environmental characteristics. Semiconductor wafer fabrication, printed circuit manufacturing and electronic component assembly may therefore require different compliance arrangements despite falling within the same general KBLI.

Environmental considerations are particularly relevant where production processes involve chemical substances, significant utility requirements or regulated waste streams. The updated procedures under Ministerial Regulation 2/2026 must also be considered for qualifying manufacturing activities located in industrial estates.

For integrated manufacturers, KBLI 26199 should be treated as the starting point for assessing the proposed manufacturing operations, not as an authorisation covering every activity in the electronics supply chain.

Additional classifications may be relevant where a company independently manufactures other finished electronic products, solar components, industrial materials or undertakes separate trading and service activities.

The critical consideration is whether the company’s registered business activities accurately reflect its actual manufacturing processes and commercial operations.

For investors and manufacturers, a reliable market-entry strategy should therefore align the company’s industrial licensing, production facilities, environmental compliance, product standards and any additional business activities before commencing commercial operations.

This alert is part of a series examining regulatory developments affecting semiconductor manufacturing, electronic components, industrial licensing, technology investment and foreign investment in Indonesia. Please feel free to contact us should you wish to discuss these developments further.

Disclaimer: Here